Jodee from Inspire Woodcraft shared the woodworking tip featured in this video. Jodee demonstrates a simple, clamp-on auxiliary infeed fence that gives extra support for long, wide, or heavy stock at the table saw. The concept is straightforward but effective, …
Jodee from Inspire Woodcraft shared the woodworking tip featured in this video. This video demonstrates a repeatable table saw setup for cutting hidden internal splines that strengthen mitered corners while keeping the outside surface clean and uninterrupted. Watch the full …
Jodee from Inspire Woodcraft shared the woodworking tip featured in this video. The video demonstrates a reliable approach to get a vibrant white on a shou sugi ban–inspired finish by combining charring, aggressive brushing, careful staining, and a steel wool …
Jodee from Inspire Woodcraft shared the woodworking tip featured in this video. Jodee demonstrates a simple way to extend the rip capacity of a small contractor-style table saw by adding a rigid ledger to the end of the table and …
Jodee from Inspire Woodcraft shared the woodworking tip featured in this video. This video demonstrates a reliable, measurement-light method for cutting half lap (half flap) joints at the table saw using the parts themselves to set critical dimensions. The approach …
Jodee from Inspire Woodcraft shared the woodworking tip featured in this video. This video shows a straightforward workflow for making complete drawers using a box-joint jig set up for repeatability and speed. The approach centers on using consistent references and …
Jodee from Inspire Woodcraft shared the woodworking tip featured in this video. The video demonstrates a reliable method for routing juice grooves that follow curved outlines without a CNC, using a simple template and a bearing-guided round-nose router bit. The …
Jodee from Inspire Woodcraft shared the woodworking tip featured in this video. Jodee explains why using the round side of a router sub base usually gives more consistent results when routing along a straight edge and how a simple centering …
Jodee from Inspire Woodcraft shared the woodworking tip featured in this video. The video demonstrates what a sliding T-bevel (also called a bevel gauge or false square) is, how it’s used for copying and transferring angles, and a few practical …
Jeff and Jon from Today’s Craftsmen shared the woodworking tip featured in this video. This short demonstration shows a simple workflow for laying out, templating, and trimming a gentle curve in a table apron or similar part without complex jigs. …
Jodee from Inspire Woodcraft shared the woodworking tip featured in this video. The video walks through three practical ways to rip and crosscut thin material on a table saw without letting the stock sneak under the fence and create a …
This project demonstration was created by Jeff from Today’s Craftsmen. In a production setting where efficiency and precision matter, Jeff shares a router bit that changes how laminated panels are prepared for CNC operations. By using a double flush trim …
This test was performed by Nick Starrett. He puts four circular saw blades—ranging from ultra-budget to premium—through real shop tests to see which one actually performs best across common cuts. If you’re a woodworker wondering whether a high-end blade is …
This video is by Norman Pirollo of WoodSkills. It highlights a set of simple, shop-ready jigs that improve accuracy, save time, and bring consistency to hand-tool workflows. Instead of large machines or complex fixtures, Norman relies on a handful of …
This technique comes from Jon Peters of Longview Woodworking. In this video, Jon walks through a simple yet effective way to achieve tight inside miters when working with flat panels and molding—particularly when factory-finished faces need to be preserved. The …
This guide is by Nick Starrett, where he walks through ten of the most common and dangerous table saw mistakes woodworkers make — and how to avoid them. Nick’s video includes demonstrations of both safe and unsafe behavior, including two …
This tip video is by Norman Pirollo of WoodSkills. It’s a minimalist, hand-tool-based method for cutting board ends square using a homemade saw guide and a Japanese pull saw—ideal for woodworkers who want accuracy without machinery. Norman demonstrates how a …
This project was built and documented by Jason from PatriotDIY. It’s a detailed impeller swap on a Harbor Freight dust collector, upgrading from the stock 10-inch fan to a larger 12-inch aftermarket model for noticeably improved airflow and suction. If …
