Clinton from Specific Love Creations walks through ten practical ladder upgrades—both store-bought accessories and simple DIY solutions—aimed at improving safety, convenience, and comfort while working at height. Watch the full video and subscribe to Specific Love Creations: Keep Tools Safe: …
Jodee from Inspire Woodcraft shared the woodworking tip featured in this video. The video walks through three practical ways to rip and crosscut thin material on a table saw without letting the stock sneak under the fence and create a …
This guide is by Nick Starrett, where he walks through ten of the most common and dangerous table saw mistakes woodworkers make — and how to avoid them. Nick’s video includes demonstrations of both safe and unsafe behavior, including two …
This safety-focused video was created by Jodee from Inspire Woodcraft. It’s a deep dive into practical table saw safety based on decades of real experience in the shop. Jodee shares his personal stories, the habits he relies on every day, …
This video is by Marcus from Salty Woodworking. He walks through five essential safety tools every shop should have—plus a bonus tip that boosts both safety and productivity. Each tool was chosen not just for protection, but also for comfort …
This experiment was conducted by Jodee from Inspire Woodcraft. It’s a thoughtful, cautionary test exploring whether a drill press can be used like a router in very specific situations. While the idea might seem practical in a pinch, this experiment …
This tip and guide video was created by Jeff and Jon from Today’s Craftsmen. It covers a series of must-know safety and technique tips for using a table saw, whether you’re just starting out or have years of experience. Table …
This tip was shared by Jeff and Jon from Today’s Craftsmen. In this video, they explain why the standard plastic push stick that comes with most table saws isn’t just ineffective—it can actually be dangerous. Drawing from real shop experience …
This tip was shared by Jodee from Inspire Woodcraft. It focuses on practical strategies for avoiding kickback during table saw crosscuts—one of the most common and dangerous challenges woodworkers face in the shop. Whether you’re cutting small parts or repeating …
This tip comes from Jodee at Inspire Woodcraft. It’s a clever way to contain dust and debris while drilling overhead—using nothing more than a recycled yogurt container. Whether you’re installing fixtures, running wires, or mounting hardware, overhead drilling usually comes …
This woodworking tip was shared by Jodee from Inspire Woodcraft. It tackles a common and often misunderstood safety topic—whether or not it’s safe to use the miter gauge and rip fence at the same time on a table saw. This …
This guide was created by Jodee from Inspire Woodcraft. It explains router feed direction with clear, practical advice for safer and more effective woodworking. Understanding how to feed material into a router is one of the most important fundamentals for …
This project was built and designed by Jodee from Inspire Woodcraft. It’s an innovative push stick design created to improve both safety and control when working with a table saw. A good push stick is essential for safe woodworking, especially …