This project was built and designed by Josh Wright. It’s a compact, modern shoe rack made from just one 8-foot 2×4, designed to complement a matching coat rack and elevate the look of your entryway.
The combination of white paint, brass accents, and minimalist joinery makes this a sharp-looking piece that also serves a practical purpose. It’s a great example of how thoughtful design can come from very simple materials.
Watch the full video and subscribe to Josh’s channel:
Using a Single 2×4 for the Whole Build
The entire project begins with a standard pine 2×4, cut down into smaller sections. Josh starts by ripping one part into 1-inch square stock, which is later used for the frame, legs, and dowel joinery.
This limited material approach forces efficiency and creativity, and it also keeps the project budget-friendly. It’s a great way to practice maximizing yield from minimal lumber.
Constructing the Frame
Multiple pieces are cut from the 1-inch square stock to form the shoe rack’s frame. Josh works from a basic cut list to ensure consistency across all parts before starting the dry fit.
For visual flair, 24-inch corner pieces are shaped using a hole saw to round the ends. These decorative curves help soften the structure and bring in more of a designer feel than typical square frames.
With the corners shaped, the frame is temporarily assembled using CA glue. This allows for adjustments and visual testing before permanently reinforcing the structure.
Strengthening with Biscuit Joinery
To lock in the joints, Josh adds biscuit joinery. Rounded splines cut from offcuts fit into slots between the corners and rails, providing both strength and a unique handmade touch.
Once the frame is glued and dry, a half-inch round-over bit is used on every edge. This adds softness to the look, though it creates quite a bit of sawdust and requires some patience to finish cleanly.
Creating Custom Legs and Metal Accents
Stability is key for a shoe rack, so legs are cut from the remaining 1-inch stock. Josh rounds and tapers each leg for a light, modern profile that still supports the frame well.
To attach the legs, aluminum pipes are used as support bars. Wooden dowels are inserted into the ends of the pipes to join them to the legs, keeping the assembly strong while adding a metallic accent.
Brass-colored tape is applied to the aluminum to match the rest of the white and brass color theme. This small detail ties the piece together visually and helps the shoe rack stand out.
Building the Shelves with Decorative Details
The remaining 2×4 stock is milled into thinner slats, roughly 24 inches long, which form the actual shelves. Some of these boards receive decorative treatment—a carved flower motif that adds a personalized detail to the project.
After gluing the boards into shelf panels, Josh frames each shelf with a border. A tapered router bit is used on the corners of the border to ensure tight, seamless joins and a professional finish.
Painting and Sanding the Shelves
White paint is applied to the shelf borders to create a crisp contrast with the natural wood. The flower carvings are filled with white filament to bring out the detail, though Josh notes the filament can cause discoloration if not handled carefully.
Sanding the shelf surfaces smooths everything out and removes any excess filler. This step is essential for a clean, even finish that highlights the design work without distraction.
Adding the Back Brace and Shelf Pins
A subtle back brace is shaped to follow the curve of the frame, improving both structure and visual balance. A shallow cove is sanded into the brace so it fits snugly around the rounded parts of the frame.
To support the shelves, small pins are driven into the inside of the frame. This approach keeps the shelves easily removable and preserves the clean lines of the design.
Finishing with Shellac
The project is finished with a spray shellac that brings out the natural grain and adds protection against scuffs and wear. It’s a quick-drying finish that gives the shoe rack a subtle sheen without darkening the wood too much.
The finished piece has a balanced, sculptural look that feels right at home in a modern entryway. It’s functional, attractive, and built with minimal materials—something that’s hard to beat.
Reflections on the Design
Josh shares that while he’s happy with the overall build, he might revisit the flower pattern depending on how visible it is under different lighting. Still, the project accomplishes its main goal: making a clean, creative shoe rack with just one 2×4.
It’s a build that shows how to blend simplicity and style without overcomplicating the process. For woodworkers looking to explore design while sticking to the basics, this is a great place to start.
Support Josh by visiting his Etsy Store.