This project was built and designed by Billy from Newton Makes. The video shows how a weathered wood pallet becomes a practical storage bin with framed sides and fabric inlays. The build focuses on simple frame-and-panel construction, removable fabric panels, …
Matt from Next Level Carpentry shared the woodworking tip featured in this video. This video demonstrates a non‑destructive method for stabilizing loose joinery in heirloom chairs using cyanoacrylate (CA) adhesives combined with careful clamping and gap‑filling techniques to avoid complete …
Norman Pirollo from WoodSkills shared the woodworking tip featured in this video. This video demonstrates two simple, plug-in bench stops that make hand planing more controlled and much less work, whether flattening a wide face or planing a narrow edge …
This project was built and designed by Chris from B&O Craftsman. Chris demonstrates how to make charming wooden pallet-style coasters using a simple template, basic cutting, and a small jig that makes batch production straightforward. Watch the full video and …
This project was built and designed by Tom from Alley Picked. This article follows a handmade pine kitchen cupboard rescued from an estate sale and restored to highlight its original craftsmanship and warm color. The cabinet was built by the …
Jon Peters – Longview Woodworking shared the woodworking project. This short project shows a simple, low-cost way to frame artwork using common lattice molding and a couple of basic techniques that anyone can adopt. Watch the full video and subscribe to …
This project was built and designed by Drew Fisher from Fisher’s Shop. Drew set out to design a fully wooden out-the-front (OTF) switchblade that would both deploy and retract the blade using the same basic principles as a metal F-style …
Mike Montgomery from Modern Builds built and designed this project. This is a low‑profile outdoor coffee table that mimics a white concrete finish while staying hollow and portable by using a wooden frame wrapped in cement board and coated with …
These projects were built and designed by Clinton from Specific Love Creations. Clinton demonstrates three approachable 2×4 projects that teach useful shop techniques while producing practical results for the home and family. Watch the full video and subscribe to Specific …
This project was built and designed by Brett from Brett’s Basement Woodshop. These adjustable and stackable sawhorses offer a compact, versatile solution for tight workshop spaces and low ceilings, combining simple joinery with an easy-to-use height mechanism. Watch the full …
Norman Pirollo from WoodSkills built and designed the tea cabinet project featured in this video. The video presents a series of contemporary tea cabinets with waterfall grain, precise case-miter joinery, and carefully fitted drawers, focusing on a three-level design that …
These projects were built and designed by Nick Starrett from Nick Starrett. Nick compares two striking cutting board designs side by side: a relatively simple patterned board called the Day Tripper and a much more involved waffle-pattern end-grain board. Watch …
This project was built and designed by Tom from Alley Picked. The video follows the rescue and repurposing of an old curbside picnic table, showing how a tired piece of furniture can be examined, repaired, and refinished to reveal hidden …
Christmas is the perfect time to get creative in the workshop and make handmade decorations that add warmth and personality to your home. These woodworking projects are beginner-friendly, use basic tools, and can be customized to match your style – …
Clinton from Specific Love Creations shared the woodworking tips featured in this video. This video focuses on practical joint techniques for 2×4 projects, covering fastener choice, glue use, common weak joints, and straightforward ways to add shear strength to everyday …
This project was built and designed by Jason from PatriotDIY. These cornhole boards are a step up from basic backyard sets, combining a refined plywood top and a sturdy internal frame with built-in conveniences like bag storage, drink holders, and …
Chris from A Glimpse Inside built and designed these projects featured in the video. Chris tackles a handful of shop work in one video, including a custom cover for a wedding venue, a small product collaboration with his daughter, and …
This project was built and designed by Zach from Bear Mountain Builds. The video shows an expanding router table that folds compact for small shops and unfolds to support very long workpieces for safer, single-operator routing. The build focuses on …
