This project was built and designed by Chris from A Glimpse Inside. It’s a budget-friendly and functional build that creates a beautiful centerpiece for your patio or backyard.
Using basic lumber and simple tools, Chris walks through each step of building a sturdy outdoor farmhouse table. With a total cost under $100, this is a perfect weekend project for both beginners and seasoned DIYers.
Watch the full video and subscribe to Chris’s channel:
Why Build an Outdoor Farmhouse Table?
Outdoor tables can be expensive, especially those made from solid wood. Building your own not only saves money but also lets you customize the size and finish to match your space.
This table is large enough for gatherings, cookouts, or casual dinners with friends and family. It’s built to last, even when exposed to the elements throughout the seasons.
What You’ll Need
The materials list is straightforward, using common lumber like 2x4s, deck boards, and a single 4×4. The simplicity of the design keeps costs low while ensuring strength and durability.
You’ll also need basic hardware, outdoor screws, and a few tools like a miter saw, drill, circular saw, and a router. A deck stain or sealant is recommended to finish and protect the table.
Preparing the Wood
Chris starts by breaking down the 2x4s into three equal sections. These are then ripped into six 2x2s, which will be used later for table framing and support.
For the tabletop, he lines up the deck boards evenly and marks them with a drywall square. The cuts are made about eight inches in from each end to ensure alignment and clean edges.
Building the Tabletop
Once the boards are cut and positioned, they’re clamped tightly together. Chris uses flush trim screws to attach the boards from underneath, giving the tabletop a clean appearance with no exposed fasteners.
These screws are designed for outdoor use and provide a secure hold without damaging the wood. The result is a sturdy, smooth surface ready for framing.
Constructing the Table Frame
With the tabletop complete, Chris moves on to building the base. Four 4×4 posts are cut for the legs and placed at the outer corners for maximum stability.
Cross supports are added using the ripped-down 2x2s, creating a solid frame underneath. A stretcher runs between the leg pairs for additional strength and a finished appearance.
To soften the look and prevent splintering, Chris rounds over the leg edges using a router with a roundover bit. This also helps protect against wear over time.
Attaching the Legs and Supports
The legs are attached to the table frame using lag screws. Chris drills angled pilot holes to give the screws a strong mechanical grip and keep everything tight.
This approach avoids the need for complicated joinery or specialized tools. It’s a simple method that delivers reliable results for outdoor furniture.
Final Cleanup and Details
With the structure assembled, Chris trims the tabletop ends using a circular saw. A quick pass with a chamfer bit on the router gives the table a refined edge without sharp corners.
He sands all surfaces to smooth out any rough spots and prep the wood for stain. This step also helps ensure even absorption of the finish.
Staining and Sealing
To finish the project, Chris applies a bold cobalt blue deck stain. You can choose any color to match your outdoor decor or keep it natural with a clear sealer.
The stain adds personality while protecting the wood from moisture and UV exposure. Multiple coats may be applied for deeper color and added durability.
A Great Project on a Small Budget
For under $100, this outdoor farmhouse table is a smart and satisfying build. It provides a functional gathering spot that will hold up through seasons of use.
Chris’s design is easy to follow and leaves room for customization. Whether you’re furnishing a deck, patio, or garden area, this project adds both charm and utility.
See the Full Build
Please support Chris by visiting his website here: https://www.aglimpseinside.org