This project was built and designed by Tom from Alley Picked.
It features the restoration of an antique architect’s chair—bringing new life to a worn but storied piece without erasing its character or charm.
Rather than stripping away its age, Tom focuses on gentle repair, careful refinishing, and preserving what makes the chair unique.
The result is a functional piece that still wears the marks of its past, restored with skill and respect.
Watch the full video and subscribe to Tom’s channel:
Finding History in the Trash
The project started when Tom stumbled across a set of discarded Adirondack chairs in an alley.
But the real treasure was hidden nearby—an antique architect’s chair that had clearly seen years of use.
Worn edges, tool marks, and subtle grooves hinted at the chair’s past owner, possibly someone who used it daily at a drafting table.
These imperfections weren’t flaws—they were part of its identity. Instead of restoring it to look brand new, Tom focused on preserving the story it carried.
Evaluating the Damage
The chair came with challenges. The seat was cracked and detached, the joints were loose, and the surface had taken a beating.
Rather than reaching for screws or hardware, Tom used wood glue to stabilize the cracks, preserving the original materials wherever possible.
Clamps were applied to hold the repaired seat pieces tightly together while the glue cured. Where tiny gaps remained, a stainable wood filler was used and later blended with carefully matched acrylic paint before restaining.
This combination of patience and subtlety is what makes the piece feel authentic. It looks whole, but it doesn’t look new—and that’s the goal.
Cleaning Without Overdoing It
When it came time to clean the wood, Tom avoided sandpaper entirely. Instead, he used very fine steel wool and paint thinner to remove decades of dirt and worn finish.
Rubbing gently along the grain, this method reveals the wood beneath without flattening out details or softening sharp lines.
Some of the old stain came off in the process, but that was expected. The cleaned surface became a perfect canvas for an oil-based restain.
Restaining With Subtlety
To revive the color without hiding the grain, Tom applied a thinned oil-based stain. This approach enhanced the richness of the wood while keeping the natural texture and character marks visible.
Once the stain set in, he wiped off the excess using a clean rag. This left a smooth, even tone that respected the chair’s age while deepening its appearance.
Bringing the Mechanism Back to Life
One of the chair’s defining features was its adjustable seat height—controlled by a clever spring-loaded lever.
While the seat could rotate freely, it only raised or lowered when the lever was engaged.
Tom disassembled the mechanism and applied a food-safe, wax-based lubricant called Slip n’ Shine. This helped restore quiet, smooth motion to the threaded shaft and moving parts, ensuring the seat was once again fully functional.
Maintaining this kind of hardware is essential in any antique furniture project. Lubricating and protecting it allows the mechanism to keep working for years without wear or binding.
Finishing With the Right Touch
To protect the newly cleaned and stained wood, Tom applied a satin polyurethane finish. This added a soft sheen without creating an overly glossy or artificial look.
Two coats were enough to seal the wood and provide resistance against future wear and moisture. The finish also helped unify the color and brought out more detail in the wood grain.
Dealing With Broken Hardware
When it came time to reattach the seat, Tom found one of the original screws broken off in its hole.
Rather than forcing in a new fastener, he drilled fresh pilot holes and used antique screws salvaged from previous projects.
This thoughtful touch kept the chair visually consistent and era-appropriate. Reusing old hardware like this helps maintain a cohesive appearance, especially when working with vintage pieces.
Respecting the Past, One Repair at a Time
By the end of the project, the chair wasn’t just usable again—it was alive with character.
It rocked smoothly, stood strong, and still wore every scar that made it special.
This kind of project reminds us that restoration isn’t always about perfection. Sometimes, it’s about doing just enough to make something last while letting its history stay visible.
Watch the full video and subscribe to Tom’s channel: