Matt Hagens 
This project was built and designed by Jodee from Inspire Woodcraft. Jodee set out to make a simple wooden spoon from a scrap piece of 4×6 pine as a toy for a three-year-old who keeps borrowing the household spoons, and …
Jodee from Inspire Woodcraft shared the woodworking tip featured in this video. The video follows a single kitchen drawer face brought in by neighbors that had a gummed-up topcoat and worn stain, and shows how to strip, sand, restain, and …
Jodee from Inspire Woodcraft shared the woodworking tip featured in this video. This short video demonstrates a simple, shop-made bandsaw jig designed to split corks in half cleanly and quickly. The idea is approachable for hobbyists and uses common scrap …
Jodee from Inspire Woodcraft shared the woodworking tips featured in this video. The video examines whether upgrading from inexpensive, box-store tools to higher-end alternatives is necessary or simply a luxury, and it uses side-by-side comparisons to illustrate where spending more …
Jodee from Inspire Woodcraft shared the woodworking tip featured in this video. The video demonstrates how to repurpose a router table to flatten a board face so it can be reliably run through a planer, using a makeshift outfeed support …
Jodee from Inspire Woodcraft shared the woodworking tip featured in this video. This short tip shows how to use conventional wood glue for a permanent bond while using superglue (CA) as a temporary clamp when clamps or fasteners aren’t practical, …
Jodee from Inspire Woodcraft shared the woodworking tip featured in this video. The video walks through climb cutting on a router table—an approach most sources warn against—and shows how to use it carefully to save workpieces prone to tear-out. Jodee …
Jodee from Inspire Woodcraft shared the woodworking tip featured in this video. The video explains a simple method to make shims that match the exact thickness of a table saw blade so the user can offset cuts without measuring. The …
Jodee from Inspire Woodcraft shared the woodworking tips featured in this video. The video highlights five unexpected yet highly useful items that Jodee reaches for in the shop more often than many traditional tools. These small additions solve everyday problems—from …
Jodee from Inspire Woodcraft shared the woodworking project featured in this video. The video demonstrates a simple, shop-made adjustable clamping caul designed to keep boards aligned and flat during panel glue-ups. Why a Clamping Caul Matters Clamping cauls act as …
This project was built and designed by Jodee from Inspire Woodcraft. Jodee upgrades a Jet JJ-6HHBT benchtop jointer by adding a simple base and infeed/outfeed extensions to better handle longer boards. The build focuses on practical shop solutions—sturdy knockdown furniture, …
Jodee from Inspire Woodcraft shared the woodworking tips featured in this video. The video compares using double-sided paper tape and switchable magnets for production cross-cut stop blocks at the table saw, explains why tape is often preferred, and shows a …
Jodee from Inspire Woodcraft shared the woodworking tips featured in this video. Jodee walks through a shop overhaul focused on dust protection, compact storage, and making frequently used tools easy to reach by consolidating gear into two rolling tool chests. …
Jodee from Inspire Woodcraft shared the woodworking tip featured in this video. The video demonstrates a simple, repeatable marking system built around a “modified crow’s foot” that Jodee uses for most layout tasks in the shop, not just cutting. The …
Izzy Swan shared the woodworking tips featured in this video. Izzy demonstrates several practical, money-saving pipe clamp tricks for a flat workbench workflow, including mounting pipe clamps to the bench side, holding panels for planing and scraping, a clever leg-holding …
Izzy Swan from izzy swan demonstrated the test featured in this video. This video shows a homemade horizontal slot mortiser built from scrap plywood and an inexpensive trim router, designed to replicate and expand on the functionality of a Festool …
Izzy Swan shared the woodworking technique featured in this video. Izzy demonstrates a simple jig and technique to cut shallow spiral coves around a round post using a table saw, producing an eye-catching turned pattern without a lathe. The setup …
Izzy Swan shared the woodworking tip featured in this video. The video outlines a system of hyper organization for a shop that balances accessibility, mobility, and real-world messiness during projects. What is hyper organization? Hyper organization is a system designed …