This technique comes from Jon Peters of Longview Woodworking. In this video, Jon walks through a simple yet effective way to achieve tight inside miters when working with flat panels and molding—particularly when factory-finished faces need to be preserved. The …
This guide is by Nick Starrett, where he walks through ten of the most common and dangerous table saw mistakes woodworkers make — and how to avoid them. Nick’s video includes demonstrations of both safe and unsafe behavior, including two …
This tip video is by Norman Pirollo of WoodSkills. It’s a minimalist, hand-tool-based method for cutting board ends square using a homemade saw guide and a Japanese pull saw—ideal for woodworkers who want accuracy without machinery. Norman demonstrates how a …
This project was built and documented by Jason from PatriotDIY. It’s a detailed impeller swap on a Harbor Freight dust collector, upgrading from the stock 10-inch fan to a larger 12-inch aftermarket model for noticeably improved airflow and suction. If …
This video is by Rob from Make Things. He walks through the hidden problems behind miter joints and shows how to make them stronger, more accurate, and longer-lasting. Instead of focusing on gimmicks or shortcuts, Rob explains the physics and …
This video is by Izzy Swan. It’s a prototype modular table system designed to expand the capabilities of Harvey’s Intelligent Alpha A-15 bandsaw into a multi-use woodworking platform. By integrating a sliding table, tilt-compatible outfeed, and digital monitoring, Izzy pushes …
This head-to-head comparison is by Jeff from TodaysCraftsmen. He put two 10″ ATBR combination blades through a series of real-world shop tests to see if spending more truly makes a difference. Instead of relying on marketing specs or lab measurements, …
This video was created by Jodee from Inspire Woodcraft. It’s a practical, real-world breakdown of spiral router bits, covering when and why to use upcut, downcut, and compression bits for better routing results. Jodee walks through bit behavior in both …
This tips is by Jodee from Inspire Woodcraft. It highlights a simple method for squaring large, out-of-alignment panels on the table saw—without needing a giant sled or full-size jointer. If you’re dealing with awkwardly sized panels that won’t register cleanly …
This tip was developed and demonstrated by Jodee from Inspire Woodcraft. It’s a clever way to joint the edge of a board using just a table saw and a strip of engineered sheet goods—no jointer required. Designed for woodworkers working …
This safety-focused video was created by Jodee from Inspire Woodcraft. It’s a deep dive into practical table saw safety based on decades of real experience in the shop. Jodee shares his personal stories, the habits he relies on every day, …
This project/tip/jig was built and designed by Jodee from Inspire Woodcraft. It’s a fast, reliable T-square-style jig that guides a router for squaring panel edges, cutting grooves, and fine-tuning plywood when table saw cuts aren’t ideal. Using just scraps and …
This woodworking tip comes from Jodee of Inspire Woodcraft. It’s a simple, math-based solution to one of the most common problems beginners face when cutting trim: inaccurate miter angles that lead to visible gaps. With a clear formula and real-world …
This tip comes from Jodee at Inspire Woodcraft. It’s a smart, affordable method for removing surface rust from diamond plates, hand tools, and cast-iron machine tops—without damaging the surface underneath. Instead of reaching for harsh chemicals or power tools, Jodee …
This tip was developed by Jodee from Inspire Woodcraft. It addresses one of the most frequent mistakes new woodworkers make when using a hand plane: adjusting the lateral (skew) lever mid-job. While that small lever feels like an easy fix …
This video is by Marcus from Salty Woodworking. He walks through five essential safety tools every shop should have—plus a bonus tip that boosts both safety and productivity. Each tool was chosen not just for protection, but also for comfort …
This project was built and designed by Jon Peters of Longview Woodworking. It focuses on veneering a simple cabinet using figured eucalyptus, showing how approachable the process can be for anyone interested in upgrading their woodworking skills. Veneering offers a …
This tip comes from Jodee at Inspire Woodcraft. It features a sandpaper-backed MDF strip—a surprisingly versatile shop accessory made from scrap and used across multiple tools for safer, more accurate work. It might look basic, but this strip combines a …
