A Faster Way to Fill Wood Before Painting

Photo of author

Jeff and Jon from TodaysCraftsmen demonstrated the test featured in this video.

Painting wood projects almost always means dealing with wood filler, and no matter how tight the joinery is, small gaps tend to show up once paint goes on. Jeff and Jon ran into this problem constantly while prepping cabinet doors, especially ones that arrive with visible pin holes or seams that need to be filled before finishing. In this video, they compare their usual filler routine to a newer option that cures instantly under UV light, and show how much time it can save in a busy paint shop.

Watch the full video and subscribe to TodaysCraftsmen:

The Problem with Traditional Wood Filler

Jeff and Jon explained that pin holes and small gaps are a regular part of prepping doors for paint, particularly when doors arrive already assembled with fasteners holding the back panel in place. Those fastener holes have to be filled before priming, which usually means filling one door, setting it aside, and waiting for the filler to dry before moving on to the next step.

That waiting period creates a bottleneck in the shop. Doors often need to be stacked while drying, which raises the risk of wet filler transferring onto the face of another door if they aren’t separated carefully.

Traditional powder-based fillers, like the kind mixed from a bag with water, also shrink as they cure. Jeff and Jon tested this by overfilling a set of holes, letting them dry for around 90 minutes, then sanding for almost as long. Even after all that time, the filler had sunk below the surface, meaning the imperfections would still show through paint.

Discovering a UV-Cured Alternative

To solve the shrinking and drying delays, Jeff and Jon started using a UV-curing filler originally made for automotive work. Unlike standard fillers, this product stays workable indefinitely until it’s exposed to UV light, at which point it hardens almost instantly.

They demonstrated this by showing a small sample that had been sitting out in the open for weeks and was still completely wet to the touch. Indirect sunlight over several days wasn’t enough to cure it either, which means there’s very little risk of wasted product sitting in a tub or getting stuck in a lid, a common issue with traditional fillers that dry out and crust over before they can be used up.

The filler comes in a couple of consistencies, a smoother type for small touch-ups and a coarser type intended for filling larger areas. Paired with an affordable UV lamp, the combination lets Jeff and Jon find a flaw, fill it, cure it, and move on in under a minute.

Filling and Curing in Real Time

To show how it performs, Jeff and Jon filled a couple of small holes, slightly overfilling since the material doesn’t shrink once cured. A few seconds under the UV lamp turned the filler rock solid, with no waiting period required before sanding.

After a quick pass with a sander, the surface came out completely smooth and flat, with none of the sunken spots that showed up with the traditional filler tested earlier. Jeff and Jon noted that the cured filler sands easily, which makes cleanup fast without risking gouges in the surrounding wood.

Comparing It to Bondo

Jeff and Jon also compared the hardness of this filler to automotive body filler, noting that it lands somewhere in between the softer wood filler and a product like Bondo. Bondo cures quickly but requires mixing two components together, which often leads to mixing more than needed and wasting material.

Bondo can also be tricky to sand evenly, since it’s often harder than the surrounding wood and can lead to sanding away too much of the surface nearby if not handled carefully. The UV filler strikes a middle ground, offering enough durability to hold up over time while still being easy to shape and blend into the surface.

WANT TO SAVE THIS ARTICLE?

Enter your email below & we'll send it straight to your inbox.

Rebuilding a Damaged Corner

One of the more useful applications Jeff and Jon demonstrated was rebuilding a chipped corner, a common issue on edges where sanding or handling causes small chunks of wood to break away. They intentionally damaged a scrap piece to simulate this kind of chip and then rebuilt the missing section using thin layers of the UV filler, curing each layer before adding the next.

This layering approach let them build the corner back up gradually rather than trying to pack in too much material at once. Once cured, the rebuilt corner held together solidly, something they noted wouldn’t happen with a standard filler, which tends to flake off in situations like this due to poor adhesion.

After shaping the rebuilt corner with fine grit sandpaper, the repair blended seamlessly with the rest of the piece. Jeff and Jon pointed out that once painted, there would be no way to tell the corner had ever been damaged.

Why This Matters for Shop Efficiency

For anyone running through multiple doors or panels in a paint prep workflow, cutting out the wait time for filler to dry can add up to significant time savings. Beyond speed, the lack of shrinkage means fewer imperfections slipping through to the final paint job, which matters most on white or light-colored finishes where every flaw tends to show.

Jeff and Jon mentioned that a filler available in wood tones would be even more useful for staining applications on oak, walnut, or cherry, but for painted projects, this UV-cured option solves a lot of the common frustrations with traditional wood filler.

See Jeff’s and Jon’s plans here: https://www.todayscraftsmen.com/

Matt Hagens

Matt’s Take

These are my personal thoughts and tips based on my own experience in the shop. This section is not written, reviewed, or endorsed by the original creator of this project.

UV-curing fillers have been creeping into general woodworking shops for a while now, and it’s easy to see why once you’ve fought with shrinkage on a traditional filler. That sunken-spot problem Jeff and Jon ran into isn’t unique to doors — it shows up on any painted project where you’re filling nail holes or seams, and it’s one of the more annoying surprises when you think you’re done and then prime it only to see the flaws telegraph right through.

One thing worth keeping in mind with UV fillers is ventilation and eye protection. A lot of these products have a resin base similar to what you’d find in UV-cure finishes, and while they’re generally low odor compared to Bondo, it’s still smart to work in a space with decent airflow. Also, don’t stare directly into the UV lamp — cheap ones can be surprisingly bright, and it’s just good practice to treat any UV light source with the same respect you’d give a welding arc or tanning bed.

For anyone trying this out for the first time, I’d suggest practicing the layering technique on scrap before tackling a visible repair. Thin layers cure more reliably all the way through than one thick glob, especially with the coarser filler. If your layer is too thick, the surface can skin over under the light while the material underneath stays soft, which defeats the purpose of an instant cure.

And on the stain-friendly filler wish — there are wood-toned fillers out there, including some epoxy-based options, though they tend to come with a higher price tag and a steeper learning curve for color matching.

**Please support the YouTube video creators by subscribing to their channels. If you make a purchase through one of our links, we might get a commission.**

WANT TO SAVE THIS ARTICLE?

Enter your email below & we'll send it straight to your inbox.

Please leave a comment to join the discussion