This video was created by Jodee from Inspire Woodcraft. It focuses on simple, effective ways to protect cast iron surfaces from rust and keep your tools running smoothly.
With just a few tools and some regular upkeep, you can extend the life of your woodworking equipment and avoid costly performance issues. Jodee walks through three practical methods that are easy to apply in any home workshop.
Watch the full video and subscribe to Jodee’s channel:
Why Cast Iron Needs Care
Cast iron tops—found on jointers, table saws, and other shop tools—are vulnerable to rust, especially in humid environments or if left exposed. Rust doesn’t just affect how your tools look—it also creates friction, making it harder to move material smoothly and accurately.
Maintaining clean, protected surfaces not only keeps your tools looking good but also ensures safer, more efficient performance. A little preventative care goes a long way in avoiding future problems.
Step One: Clean the Surface Thoroughly
Before removing rust, Jodee recommends cleaning the tool’s surface using a vacuum and brush to clear dust and debris. Starting with a clean base helps you better see what you’re working with and prevents adding new contaminants during the process.
He then uses denatured alcohol to wipe down the surface. In areas where this isn’t available—like California—mineral spirits are a reliable alternative. These solvents help remove light rust, wax residue, and surface grime in preparation for deeper cleaning.
Method 1: Wet/Dry Sandpaper with Lubricant
For small, localized rust spots, wet/dry sandpaper combined with a lubricant like WD-40 is effective. Jodee wraps the sandpaper around a flat block of wood to maintain even pressure and avoid gouging the soft cast iron surface.
Using 400-grit paper, he gently sands the affected area, taking care not to overdo it. The slurry created is wiped away to reveal clean metal underneath. While this method works well for targeted spots, it can get messy and isn’t ideal for large surface areas.
Method 2: Random Orbit Sander for Larger Surfaces
When the rust covers more of the tool surface, Jodee switches to a random orbit sander. Starting with 400 grit gives him a baseline for how much material needs to be removed, and he only moves to heavier grits if necessary.
He emphasizes keeping the sander moving and applying even pressure to avoid dips or grooves. After sanding, another wipe-down removes any dust and prepares the tool for the next step.
Protective Finish: Apply a Coat of Wax
To prevent rust from coming back, a heavy coat of paste wax is applied. Jodee uses Minwax paste wax, buffing it out after a short wait to leave a slick, protective surface that also helps wood glide more smoothly during use.
Although he hasn’t personally tested Boeshield T-9, he mentions it as a popular alternative among other woodworkers. Both options help shield the cast iron from moisture while making the surface easier to clean in the future.
Quick Maintenance: Use Sanding Blocks for Touch-Ups
Even with regular upkeep, minor rust may show up—especially near blades and high-contact areas. For these quick fixes, Jodee recommends specialized sanding blocks made for metal surfaces.
These come in various grits and allow for fast, controlled rust removal without needing to break down the whole setup. Once done, reapply a bit of wax to maintain protection.
Perfection Isn’t the Goal
Jodee reminds viewers that cast iron tools don’t need to be flawless. Scratches, discoloration, and surface marks are normal signs of use and shouldn’t be a concern unless they affect performance.
The real goal is to maintain a flat, smooth surface that doesn’t introduce drag or hazards during cuts. Regular upkeep keeps your shop tools reliable without stressing over every minor imperfection.
Simple Habits, Long-Term Benefits
Keeping cast iron tools in good condition doesn’t require complicated routines. Just a combination of cleaning, occasional sanding, and protective waxing can dramatically reduce rust and extend the life of your tools.
Jodee’s video offers not only technique but reasoning behind each step, helping woodworkers of all experience levels understand why it matters. These small habits add up over time and protect your investments for years to come.
Support Jodee by visiting his online store here: https://inspirewoodcraft.com/collections/all.