Jodee from Inspire Woodcraft shared the woodworking tip featured in this video. Jodee demonstrates a simple way to extend the rip capacity of a small contractor-style table saw by adding a rigid ledger to the end of the table and …
Jodee from Inspire Woodcraft shared the woodworking tip featured in this video. This video demonstrates a reliable, measurement-light method for cutting half lap (half flap) joints at the table saw using the parts themselves to set critical dimensions. The approach …
Jeff and Jon from Today’s Craftsmen shared the woodworking tip featured in this video. This short demonstration shows a simple workflow for laying out, templating, and trimming a gentle curve in a table apron or similar part without complex jigs. …
Jodee from Inspire Woodcraft shared the woodworking tip featured in this video. The video walks through three practical ways to rip and crosscut thin material on a table saw without letting the stock sneak under the fence and create a …
This test was performed by Nick Starrett. He puts four circular saw blades—ranging from ultra-budget to premium—through real shop tests to see which one actually performs best across common cuts. If you’re a woodworker wondering whether a high-end blade is …
This guide is by Nick Starrett, where he walks through ten of the most common and dangerous table saw mistakes woodworkers make — and how to avoid them. Nick’s video includes demonstrations of both safe and unsafe behavior, including two …
This tip video is by Norman Pirollo of WoodSkills. It’s a minimalist, hand-tool-based method for cutting board ends square using a homemade saw guide and a Japanese pull saw—ideal for woodworkers who want accuracy without machinery. Norman demonstrates how a …
This video is by Izzy Swan. It’s a prototype modular table system designed to expand the capabilities of Harvey’s Intelligent Alpha A-15 bandsaw into a multi-use woodworking platform. By integrating a sliding table, tilt-compatible outfeed, and digital monitoring, Izzy pushes …
This head-to-head comparison is by Jeff from TodaysCraftsmen. He put two 10″ ATBR combination blades through a series of real-world shop tests to see if spending more truly makes a difference. Instead of relying on marketing specs or lab measurements, …
This tips is by Jodee from Inspire Woodcraft. It highlights a simple method for squaring large, out-of-alignment panels on the table saw—without needing a giant sled or full-size jointer. If you’re dealing with awkwardly sized panels that won’t register cleanly …
This tip was developed and demonstrated by Jodee from Inspire Woodcraft. It’s a clever way to joint the edge of a board using just a table saw and a strip of engineered sheet goods—no jointer required. Designed for woodworkers working …
This safety-focused video was created by Jodee from Inspire Woodcraft. It’s a deep dive into practical table saw safety based on decades of real experience in the shop. Jodee shares his personal stories, the habits he relies on every day, …
This technique was demonstrated and tested by Jodee from Inspire Woodcraft. It’s a clever and simple upgrade that uses a permanent scribe line on your table saw to speed up everyday tasks like trimming, duplicating, and setting up angled cuts—without …
This woodworking tip is by Jodee from Inspire Woodcraft. It’s a fast, simple method that helps you make repeated crosscuts on a table saw—accurately, safely, and without complex jigs or fixtures. Instead of relying on your rip fence or building …
This project was built and designed by Jodee from Inspire Woodcraft. It’s a custom bandsaw jig that allows woodworkers to cut perfect circles without drilling into the workpiece—while minimizing tear-out and simplifying adjustments. Designed for flexibility, this jig addresses common …
This tip is by Jodee from Inspire Woodcraft. It’s a clever and precise method for cutting flawless dados and grooves using a standard table saw blade—no dado stack or trial-and-error required. By making a simple shim that matches your blade’s …
This ides is by Jodee from Inspire Woodcraft. It’s an experiment aimed at improving cut accuracy when working with extreme angles on a table saw—especially when the goal is to keep the workpiece clean and protect the miter gauge fence. …
This tip is by Jodee at Inspire Woodcraft. Known for clear, no-nonsense woodworking advice, Jodee breaks down how blade height affects cut quality and what to consider for different materials and techniques. Whether you’re a beginner or experienced woodworker, understanding …