This project was built and designed by John Dolechek. It’s a compact wine rack with a clean, modern look with interlocking slats.
The rack is made from solid wood boards cut into evenly sized slats. Each board has notches cut halfway through its width, allowing them to slide together in a grid pattern.
Watch the full video and subscribe to John’s channel:
Visit John’s website here for more detail: https://johndolechek.myportfolio.com/wine-rack.
Matt’s Take
These are my personal thoughts and tips based on my own experience in the shop. This section is not written, reviewed, or endorsed by the original creator of this project.
This interlocking grid design is such a clever approach to wine storage. The half-depth notches are what make the whole thing work — they need to be precisely positioned and cut to the exact same depth for the slats to sit flush when assembled. A dado blade or router with an edge guide will give you the most consistent results for those notches.
One thing I really appreciate about this design is how stable it becomes once assembled. Those interlocking joints create a surprisingly rigid structure without any glue or fasteners. The key is getting your measurements right from the start — measure twice, cut once definitely applies here since each slat depends on the others fitting perfectly.
For wood selection, I’d lean toward something with good dimensional stability like maple or cherry. Pine can work for a budget build, but hardwoods will hold up better long-term, especially if you’re storing heavier bottles. Just make sure your stock is properly dried and acclimated to your shop before cutting those precise notches.