This project was built and designed by Tyler from DIYTyler.
It’s a practical wall-mounted clamp rack that keeps quick clamps, F-style clamps, and parallel clamps easily accessible and off the floor—perfect for any busy woodworking shop.
Tyler’s design is simple, efficient, and made mostly from scrap material.
It solves the common headache of clamp clutter and makes glue-ups faster by keeping tools within arm’s reach.
Watch the full video and subscribe to Tyler’s channel:
Why a Clamp Rack Is Worth the Effort
Clamps are essential for woodworking, but storing them is often overlooked.
When piled on a bench or jammed into a corner, they’re not only hard to access but also take up valuable space.
Tyler set out to fix that problem with a solution that’s compact, strong, and easy to build. This rack keeps clamps tidy and organized while still allowing you to grab the right one quickly during a project.
Materials and Layout
The build doesn’t require expensive lumber or hardware. Tyler uses leftover plywood and solid wood scraps—common materials found in most shops.
While he doesn’t share exact measurements, the rack’s size can be easily adjusted to match your clamp collection.
It’s designed with flexibility in mind and can be built wider or taller depending on your needs.
Building the Rack Frame
The first step involves cutting the panels to size. These pieces form the back, sides, and clamp supports, and they’re shaped based on the specific clamps being stored.
Using a miter saw or table saw, Tyler preps each piece for assembly.
Pocket holes are used on the bottom edge to keep screw heads hidden and give the rack a clean look once it’s mounted on the wall.
Strong Joinery and Clean Assembly
Wood glue is used on all major joints to ensure strength, especially since the rack will carry heavy loads when fully stocked.
The sides are secured with glue and either screws or brad nails, depending on what’s on hand.
The pocket holes on the underside are a nice touch—they keep the front clean and reduce the chance of catching clamps or hands on exposed fasteners.
Mounting and Adjustments
Once assembled, the rack is mounted directly to the shop wall.
Positioning is important—Tyler places it high enough to keep clamps accessible, but low enough to avoid interfering with upper storage.
The design supports multiple styles of clamps in one rack, and the layout allows you to grab and return clamps quickly during any stage of a build. There’s even room to expand the rack later if your clamp collection grows.
Benefits in Daily Use
The biggest advantage is how much smoother clamp setup becomes. Instead of digging through a pile, you can instantly see what’s available and pull out exactly what you need.
Tyler shows how easy it is to grab multiple clamps at once, which can shave minutes off each glue-up and keep your momentum going.
This rack isn’t just for storage—it actively improves your workflow.
A Compact Fix for a Common Problem
Space is always at a premium in small shops. This rack mounts flush against the wall and takes up very little room, while holding a surprising number of clamps.
By organizing vertically, you reclaim floor and bench space that can now be used for assembly, cutting, or finishing tasks.
It’s a great example of how smart shop layout can improve efficiency without major changes.
A Shop Upgrade That Pays Off
This project may be small, but it delivers big results.
Better clamp storage means fewer delays, less frustration, and a cleaner work area—especially important when working on time-sensitive glue-ups.
It’s the kind of improvement that makes the shop feel more dialed-in and professional.
Tyler’s version is easy to replicate, and it can be customized in countless ways to fit your own setup.
Please support Tyler by visiting his website here: diytyler.com
Matt’s Take
These are my personal thoughts and tips based on my own experience in the shop. This section is not written, reviewed, or endorsed by the original creator of this project.
Organization projects like this might seem simple, but they’re often the most impactful upgrades you can make in the shop. I’ve found that good clamp storage is one of those things you don’t realize you need until you have it—then you wonder how you ever worked without it. The beauty of Tyler’s approach is that it gets clamps completely off horizontal surfaces while keeping them visible and accessible.
The pocket hole detail on the bottom is smart thinking. Those hidden fasteners not only look cleaner but also eliminate snag points when you’re pulling clamps off the rack quickly. Safety-wise, that matters more than you might think—rough edges and protruding screws are easy to catch skin or clothing on when you’re focused on a glue-up and moving fast.
One thing I really appreciate about this design is how it accommodates different clamp styles in one rack. Mixing quick clamps, F-style, and parallel clamps usually creates storage headaches, but this layout handles the variety well. The key is getting the spacing right for your specific collection—you want enough room to grab individual clamps without everything falling off when you pull one out.
Wall mounting is definitely the way to go here. Floor stands take up precious real estate and can tip over when loaded. Just make sure you hit studs with your mounting screws, especially if you’re planning to load this thing up with heavy parallel clamps. The weight adds up quickly, and drywall anchors won’t cut it for the long haul.