This project was built and designed by Anthony from Wood Pack DIY.
The video follows Anthony as he helps his neighbor Oscar make a custom credenza for an office, blending plywood construction with a solid walnut top and drawer faces for a modern, streamlined look.
Throughout the build, Anthony demonstrates layout choices, joinery that accommodates wood movement, and a few practical fixes when surprises pop up.
Watch the full video and subscribe to Wood Pack DIY:
Design
The credenza aims for clean, modern lines with inset doors and drawer faces complemented by a solid walnut top for warmth and contrast.
Anthony kept the aesthetic restrained: painted black lower elements and pulls, natural walnut surfaces, and low, discrete feet to preserve a minimalist profile.
Lumber Prep
Boards were milled and matched for grain flow, with careful selection and flipping to get pleasing continuity across the top and drawer faces.
Edge banding was applied to exposed plywood edges, and the walnut panels were planed and thicknessed before Domino alignment was used for panel glue-ups.
Joinery and Allowing for Movement
Rather than running dadoes fully through the front, Anthony made interrupted grooves so the joinery remains inset and hidden from the front face.
The top was attached with a combination of fixed front screws and oversized holes at the rear to allow the solid walnut to move seasonally without stressing the cabinet.
Assembly and Clamping
Glue-ups were handled in stages, and having an extra set of hands made aligning the carcass and installing internal supports much smoother.
Pocket screws were used where appropriate—such as attaching the plywood back and the undercarriage—so clamps were needed only during initial setup rather than long-term.
Shaping, Hardware, and Fixes
Finger-pulls were routed directly into the door and drawer faces for a seamless look, requiring careful stop settings and mirrored cuts for each side.
When a hinge jig was set incorrectly, Anthony patched the mis-drilled areas with a plywood plug and trimmed it flush before re-drilling the correct hinge pockets, demonstrating a useful recovery technique.
Finishing
Painted areas received a water-based black poly that shows a bit of grain while providing a durable surface for the cabinet base and doors.
The walnut top was finished with Rubio Monocoat Pure in two coats to enrich the tone, while drawer interiors and bottoms were sealed with multiple wipe-on polyurethane coats and light sanding between applications.
Lessons Learned
The build highlights several practical lessons: plan for wood movement, test-fit hardware before final assembly, and keep a stash of scrap material for quick repairs and patching.
Mistakes—like misplaced pocket holes or slightly mis-sized drawer faces—were addressed with straightforward fixes, showing how joints, alignment, and measurement checks can save a project from major rework.
Why This Credenza Matters
This credenza is a solid example of combining plywood efficiency with solid wood accents to achieve a refined, functional piece without exotic techniques.
Anthony’s approach—thoughtful grain matching, allowance for movement, and practical fixes—makes the project adaptable for woodworkers who want a modern cabinet with long-term durability.
Please support Anthony by visiting their website (he sells awesome plans): https://www.woodpackdiy.com/.