Connor from Shopfix shared this video.
Connor demonstrates how to make frameless, European-style cabinets that prioritize simplicity, strong joinery, and easy hardware installation.
Watch the full video and subscribe to Shopfix:
Design
The frameless approach removes face frames and leans into tight reveals and clean drawer lines for a modern look. This layout scales from single shop cabinets to long bank installations and emphasizes accessible hardware placement.
Connor favors doubling cabinet widths in places to save material and add rigidity, which is a useful strategy when strength and economy are both priorities. The result is a heavy, stable unit that mounts and levels as a single assembly rather than many small pieces.
Lumber Prep
Plywood panels are the backbone of the build, and Connor highlights keeping parts square and consistent before assembly. Accurate panel layout and consistent pocket-hole placement prevent problems later during installation and door hanging.
Rather than relying on adjustable shelving for every cabinet, fixed stretchers and shelves were used for strength and repeatability, which simplifies layout and reduces the hardware count. This choice suits shop storage where adjustable locations aren’t required.
Joinery
Pocket holes are the primary joinery method shown, and coarse-thread screws are recommended for plywood because the core layers behave more like softwood. Consistent pocket-hole placement and avoiding interference between adjacent holes are practical details Connor emphasizes to prevent split panels and misaligned joints.
Glue and screws are combined for solid joints, and orienting pocket holes to the exterior keeps them hidden while making assembly fast. Connor also warns against using an impact driver for final screws to avoid overdriving and damaging the assembly.
Clamping and Assembly
Using 90° clamping jigs removes the stress of holding panels square and acts like a hands-free assistant during assembly. Clamping the cabinets together and screwing them into one long run lets the builder level and mount a single, rigid unit rather than fiddling with multiple small cabinets.
Strategically adding horizontal stretchers across the cabinet front ties everything together and creates even spacing for drawer banks. Doubling up a cabinet to create a wider unit can save time, material, and improve overall strength when done thoughtfully.
Leveling and Installation
Connor addresses real-world site issues such as uneven floors and walls by using heavy-duty adjustable leg levelers at the front and a leveled cleat in the back. Leveling the whole bank as a single unit simplifies getting clean reveals and consistent door gaps across multiple cabinets.
During wall mounting, shims and shallow pilot countersunk holes prevent the screws from pulling the cabinet away from an uneven surface. Finding stud centers, rather than just edges, helps make firmer, more reliable attachment points for the assembly.
Doors, Hardware, and Fit
Door preparation relies on jigs for consistent hinge boring and hardware placement so multiple doors match perfectly in operation and appearance. For larger doors, adding a third hinge helps maintain alignment and reduces sag over time.
Connor uses simple templates and jigs to mark hardware and hinge locations, which speeds repetitive drilling and preserves symmetry across runs of cabinets. This practice makes final adjustments straightforward when hanging doors and aligning drawer faces.
Toe Kick and Final Adjustments
To match an uneven floor without wasting plywood, Connor cuts a cardboard template by taping and trimming it to the cabinet bottom and then transfers that pattern to the plywood. This templating trick yields a perfect fit every time and eliminates guesswork when making the toe kick.
Once the toe kick panel is fitted and clipped into the levelers, finishing trim cleans up the base visually and hides small gaps. The combination of careful templating and manufacturer toe clips produces a snug, professional-looking base fit.
Finishing Touches and Durability
With stretchers, shelves, doors, and hardware installed, the cabinets are ready for normal shop use and the occasional rough treatment. The frameless method delivers tight lines and a clean aesthetic while remaining straightforward to assemble and install.
These techniques translate well to kitchens, garages, and workshops because they balance speed, strength, and a modern look without adding the extra complexity of face frames. Builders can adapt the approach to different sizes and usage needs while keeping the core methods intact.
Why This Method Matters
Frameless cabinets reduce installation friction and make hardware work easier, which is valuable for DIY builders and professionals alike. The method focuses on consistent layout, practical jigs, and clever on-site solutions to handle imperfect walls and floors.
Connor’s approach emphasizes reproducibility and adaptability, offering a path to get professional results with commonly available tools and a few smart tricks. Those principles make this a compelling method for anyone planning cabinet work in a less-than-perfect space.
Please support Connor by visiting his website: https://www.shopfix.services/.