This tip is by Jodee at Inspire Woodcraft. In this summary, we break down three methods Jodee uses to check for square—each helpful whether you’re building furniture, framing a structure, or just trying to get more accurate results.
Checking for square is one of the most important skills in woodworking. If your workpieces aren’t square, your entire project can end up misaligned, unstable, or just plain off.
Watch the full video and subscribe to Jodee’s channel:
Why Squareness Matters
Square corners are the foundation of accurate woodworking. Whether you’re making a picture frame or assembling cabinet boxes, getting things square ensures parts fit together cleanly and look professional.
Even small errors at the start can lead to major problems later. Learning a few ways to check for square early in the process can save time, materials, and frustration.
A Note About Squares
It’s easy to assume that bigger is better when it comes to tools like framing or carpenter’s squares. But Jodee points out that smaller squares often give better results, especially when working on materials with uneven edges or minor bowing.
The trick is to work off of at least one verified straight edge. If you can trust that edge, the square you choose—large or small—will work much more effectively.
Method 1: The 3-4-5 Rule
This method uses the Pythagorean theorem to create a perfect right triangle. From one corner, measure three units along one side and four units on the adjoining side. If the distance between those two marks is exactly five units, the corner is square.
You don’t have to use feet or inches. Any consistent unit will work—such as 3, 4, and 5 inches, or even 6, 8, and 10. You can scale it to fit your workspace, and it’s one of the fastest ways to get confirmation on layout accuracy.
Method 2: Measuring Diagonals
For square or rectangular frames, measuring both diagonals is a reliable check. If the two measurements are equal, the frame is square. If one is longer, adjust the structure until both diagonals match.
This method is especially helpful on larger projects where it’s tough to use a square or apply the 3-4-5 rule. It’s a fast way to validate your layout before fastening or gluing parts together.
Method 3: Pinch Sticks
Pinch sticks are a tool-free, number-free way to check square. Cut two sticks to about two-thirds the length of your frame’s opening. Cut one end of each at a 67.5-degree angle.
Hold the angled ends in opposite corners of your project and clamp the sticks together where they cross. Pull the clamped sticks out and try them in the opposite diagonal. If they fit the same way—snug, without forcing—it means your project is square.
Why These Methods Are Useful
Each method suits a different situation. The 3-4-5 rule is great for initial layout. Diagonal measuring works best on large assemblies. Pinch sticks are ideal when working solo and trying to confirm square without math or tools.
Jodee highlights these not as replacements for precision tools, but as go-to strategies when those tools aren’t ideal. They offer flexibility, simplicity, and confidence at every stage of a project.
Practical Tips from the Video
- Use clearly marked measuring points and double-check before locking anything in.
- When using the 3-4-5 method, use sharp pencils and firm measuring tapes or rulers to stay accurate.
- For diagonal checks, measure from the exact inside corners—not the outside edges.
These small habits lead to better results and help avoid the need to fix things after assembly.
Support Jodee by visiting his online store here: https://inspirewoodcraft.com/collections/all.