If you’re looking for a fun woodworking project, Steve from Popo’s Woodworks has you covered with this DIY shot glass display case. This project is beginner-friendly and offers a great way to showcase your shot glass collection. The display case can hold up to 42 shot glasses and is made with premium lumber, making it an attractive addition to any home bar or kitchen.
Materials Required:
- 5 pieces of 1/2” x 4” x 24” premium pine
- 2 pieces of 1” x 4” x 48” premium pine
- 1 piece of 1/4” x 2ft x 2ft plywood
- Spray polyurethane
Tools Needed:
- Miter saw
- Brad nailer
- Drill with a 1 5/8” Forstner bit
- Clamps
- Square
- Measuring tape
Step 1: Gather Your Materials
First things first, Steve gathered all the materials needed for the build. He headed to Lowe’s and selected the premium pine lumber, which he found to be smoother and easier to work with. The total cost for all materials was around $40.
Step 2: Measure and Cut the Lumber
With the materials in hand, Steve began measuring and cutting the lumber. He planned to have five shelves in the display case, using the half-inch boards for the shelves and thicker boards for the sides. He laid out the boards to ensure even spacing and cut them to the correct lengths.
Step 3: Create Grooves for the Shelves
Instead of using pocket screws, Steve decided to create grooves in the side panels for the shelves to slide into. He used a miter saw to make precise cuts, ensuring the grooves were straight and clean.
Step 4: Drill Holes for the Shot Glasses
After cutting the grooves, Steve marked the positions for the holes that would hold the shot glasses. He used a three-inch jig to help position the holes accurately and drilled them with a Forstner bit.
Step 5: Assemble the Display Case
Once all the pieces were cut and drilled, it was time to assemble the display case. Steve applied wood glue to the joints and slid the shelves into place. He then clamped everything together to let it dry.
Step 6: Add the Back and Stain
After the glue dried, Steve attached the plywood back to the display case. He then stained the wood to enhance its appearance and let it dry. The stain gave the display case a polished look, perfect for showcasing the shot glasses.
Step 7: Final Touches
With the staining complete, Steve added some hanging hooks to the back for easy mounting. He ensured everything was secure and ready for the shot glasses. The final dimensions of the display case measured 23 inches tall and 24 3/4 inches wide.
Conclusion
Steve’s DIY shot glass display case is a fantastic project for anyone looking to showcase their collection. With just $40 worth of materials and some time, you can create a beautiful and functional piece for your home.