Scott from Saws on Skates shows us how to make a primitive-style printer stand that combines functionality with rustic charm. This project is perfect for anyone looking to organize their printer supplies while maximizing space in their home office.
Materials and Tools Needed
- Pine boards (for construction)
- Beadboard (for the back panel)
- Pocket hole screws
- Wood glue
- Wood accelerator (for a weathered finish)
- Spray lacquer
- Polyurethane (matte sheen)
- Table saw
- Kreg jig
- Shelf pin jig
- Putty knife (for glue removal)
Step 1: Design the Printer Stand
Scott started by identifying the need for a dedicated space for his printer. He designed a compact printer stand that fits perfectly in his small office. The stand accommodates a laser printer, scanner, and extra paper, with space on top for a lamp.
Step 2: Gather Materials
Using pine boards instead of plywood, Scott preferred the ease of handling smaller pieces in his workshop. He emphasized the importance of squaring or joining the edges of the boards before gluing them together to ensure a tight fit.
Step 3: Prepare the Boards
Scott used a table saw to joint the edges of the boards for a clean square cut. He mentioned that while some woodworkers prefer damp rags for glue squeeze-out, he waits for the glue to form a skin before removing it with a scraper.
Step 4: Assemble the Printer Stand
Using pocket holes for assembly, Scott filled the holes with plugs and sanded them smooth after the glue dried. For the back of the stand, he used beadboard to ensure the grooves were centered before attaching it.
Step 5: Create Adjustable Shelves
Scott used a shelf pin jig to create holes for adjustable shelves. He designed the door panels to be slightly wider than necessary to allow for clearance on each side. This cautious approach helped him achieve the perfect fit through gradual adjustments.
Step 6: Add the Final Touches
For the door design, Scott opted for an overhanging style, creating a built-in handle. He applied a wood accelerator for a weathered look and sealed it with spray lacquer and three coats of matte polyurethane.
Step 7: Enjoy Your New Printer Stand
With the printer stand completed, Scott emphasized that this DIY project not only provides ample storage but also enhances the aesthetics of his workspace. He encouraged viewers to transform their own home offices with this functional and inviting piece.
