This project was built and designed by Mike Montgomery from Modern Builds. It’s a mid-century modern inspired platform bed that blends strong, clean joinery with practical design for everyday use.
The structure is based on 4×4 beams with hairpin legs and optional headboard customization. With smart joinery, minimal visible hardware, and clean proportions, this bed offers a stylish way to elevate any bedroom.
Watch the full video and subscribe to Mike’s channel:
Blending Style with Simplicity
The bed’s design draws from both mid-century and Japanese influences. Straight lines, open space, and thoughtful proportions keep the look minimal while remaining visually strong.
Mike designed this build to be adjustable for different mattress sizes, which makes it easy to adapt to any bedroom. The flexibility in measurements allows users to customize the project for their specific needs and style.
Materials and Structural Planning
The main structure uses 4×4 beams for the outer frame. These beams are chosen not only for their strength but also for their clean appearance when planed and finished.
Before assembly, the beams are smoothed out using a planer to remove rough textures and mill marks. Selecting beams with uniform grain and minimal knots helps achieve a more refined look when finished.
Joinery and Frame Assembly
To align the beams and create strong connections, dowels are used in addition to glue. This method helps maintain square corners and makes the bed easier to disassemble and reassemble in the future if needed.
Each joint is reinforced with pocket screws placed using a jig. This keeps the fasteners hidden and strengthens the frame by pulling each piece tightly into place.
Cross Supports for Strength
Mike adds cross braces using 2×4 lumber. These supports run beneath the slats to prevent sagging over time and distribute weight evenly across the frame.
Pocket holes are again used to attach these braces securely. With this system, the bed remains sturdy while still having a clean and simple design from every visible angle.
Selecting and Installing the Legs
For the legs, raw steel hairpin legs are chosen to give the piece a modern, industrial touch. They elevate the frame while keeping the visual profile light and open.
To meet the client’s request for extra under-bed clearance, risers made from leftover 2×4 scraps are added between the legs and the bottom of the frame. These can easily be modified to adjust height as needed.
Designing and Building the Headboard
The headboard is constructed from a single sheet of plywood, cut to match the width of the bed. Mike adjusts the height slightly to keep the visual balance and make sure it doesn’t overpower the frame.
To avoid tear-out and get a smooth edge, he cuts the plywood with a straight edge guide. The result is a clean, flat panel that blends perfectly with the rest of the bed.
The headboard is attached at the rear of the frame using pocket screws and pre-drilled holes. The design keeps hardware hidden and the profile tight, creating a seamless look against the wall.
Sanding and Applying Finish
After the bed and headboard are assembled, all exposed wood surfaces are sanded down to a smooth finish. Mike sands progressively to a fine grit, making sure the finish goes on evenly.
A dark walnut Danish oil is applied to bring out the grain and unify the color between wood types. Since different boards may absorb finish differently, stain blending is sometimes used to match tones more closely.
After curing, the oil leaves a rich tone and slight sheen that enhances the wood’s natural character without looking overly polished.
Final Assembly and Takeaways
Once dry, the frame is fully assembled and placed in the room. Slats or a solid platform base can be added depending on mattress type, and the bed is ready for use.
Mike’s approach to this project highlights a great balance of simplicity and smart building. The result is a bed that’s easy to assemble, strong enough for daily use, and stylish enough to be the centerpiece of the room.
A Stylish and Customizable Build
This modern platform bed is a great project for woodworkers who want something clean, solid, and adaptable. Whether you’re building a full bedroom set or just need a new bed frame, this design is versatile enough to suit different spaces and preferences.
The use of standard lumber sizes and accessible tools makes this a doable weekend project for intermediate woodworkers. The end result is a durable, attractive bed that can be tailored to your home.
Please support Mike by visiting his website: https://www.modernbuilds.com/.