Looking for a creative gift idea that’s both fun and easy to make? This tabletop ring toss game designed by Jamison from Rogue Engineer is perfect for any occasion. In this guide, Jamison walks through the step-by-step process of building this fun game.
Materials and Tools Needed
- 1×8 board (for the base)
- 1×4 board (for the top and scoring peg)
- 1¼ inch dowel
- Rings for tossing
- Hooks and string
- DAP Rapid Fuse adhesive
- Drill with an inch and a quarter Forstner bit
- Clamps
- Wood screws
- Saw
- Sander
Step 1: Cutting the Wood
First, Jamison decided on a 12-inch platform for the base. He cut the 1×8 to this length. For the 1×4, he tapered the ends to give it a nice look. The dowel was cut to 16 inches in height, which allows ample room for the rings to swing.
Step 2: Drilling the Holes
Next, he drilled a hole in the 1×4 using the Forstner bit, which creates a clean hole. Centering the hole is crucial, so he marked the middle before drilling. After ensuring the dowel fits well, he measured the top board to be 22 inches long and drilled another hole halfway through.
Step 3: Assembling the Base
With the holes drilled, Jamison proceeded to assemble the base. He used the DAP Rapid Fuse adhesive to attach the top board to the base. The dowel was then secured from the bottom with wood screws, ensuring a sturdy construction.
Step 4: Finishing Touches on the Base
Before fully assembling, Jamison sanded down the top piece and the base for a smooth finish. He also painted the scorekeeper holes black and added his signature Rogue Engineer crest on each side, followed by a clear coat for protection.
Step 5: Adding the Hardware
To complete the game, he installed two eyelets at the top and attached hooks. He then tied off the string and the ring to finish the setup. This is where the fun begins, as players can now enjoy tossing rings onto the hooks!
Step 6: Enjoying the Game
And there you have it! The tabletop ring toss game is ready to play. It’s not only a fantastic game but also makes a great holiday gift idea. Jamison encourages everyone to try building this game and to enjoy the competitive fun it brings!
If you want to dive deeper into the project and get the full plans, visit the Rogue Engineer website.