This decorative woven cutting board was designed and crafted by Fisher’s Shop, and it’s a fun project that offers a beautiful result. In this guide, you’ll learn the step-by-step process of making your own woven cutting board, perfect for impressing friends and family.
Materials and Tools Needed
- Walnut boards
- Hot glue
- CA glue (cyanoacrylate glue)
- Painters tape
- Wood strips for weaving
- Wood clamps
- Planer
- Joiner
- Band saw
- Miter saw
- Router with flush trim bit
- Sanding tools
- Mineral oil and beeswax blend for finishing
Step 1: Prepare Your Walnut Boards
Start by selecting walnut boards with interesting character. If they are wobbly, use a sled and shims to stabilize them. Attach a cleat to the back and secure the front with hot glue. Then, run the board through the planer multiple times to achieve a flat surface.
Step 2: Make Test Cuts on Scrap Wood
Before cutting your actual boards, perform test cuts on scrap plywood to ensure your band saw blade is suitable. Adjust the blade if necessary to achieve smooth curves.
Step 3: Clean Edges and Trim
Use a table saw to clean the edges of both boards. Place them side by side to check their alignment and mark any areas that need trimming, which you can do with a miter saw.
Step 4: Create Sacrificial Cutting Boards
Make small sacrificial cutting boards that will be cut up and woven into the main project. These pieces will serve as the runners for your woven design.
Step 5: Begin the Weaving Process
Align the first runner board with the walnut pieces to determine where to weave. Temporarily glue them together using painter’s tape and CA glue. Draw a straight line down the board where you will make your cut.
Step 6: Fill Gaps with Wood Strips
After cutting, you’ll need to fill the gaps between the pieces with thin strips of wood that match the curve. Use a thin strip jig to cut these strips accurately.
Step 7: Glue Up the Pieces
Apply glue to both pieces and clamp them tightly to ensure a strong bond. Repeat the process for the other runner board and walnut piece.
Step 8: Final Assembly and Shaping
After the glue has dried, combine the larger pieces and glue them together to form the weave. To add interest, make additional cuts and glue in more strips as needed.
Step 9: Shape the Cutting Board
Sketch a curve on a scrap piece of wood to create an interesting shape for the cutting board. Cut this shape out and attach it to the main board using a router to trim off excess material.
Step 10: Finishing Touches
Finally, sand the board to a smooth finish and apply a mineral oil and beeswax blend to protect the wood. This step enhances the natural beauty of the walnut and highlights the woven design.
Conclusion
This decorative woven cutting board is not only functional but also a stunning piece of art. With the weaving technique, you can create beautiful designs that will impress anyone who sees them. Happy woodworking!
Video