Looking for a simple woodworking project that’s easy to tackle? This wooden cell phone stand was created by Davids Diy Reviews. With just a few cuts and no drilling required, this project is a great way to create a functional piece for your home.
Materials Needed:
- Wood board (dimensions below)
- Hand saw or coping saw
- Miter box (optional)
- Sandpaper
Dimensions:
- Upright piece: 7 inches tall
- Support piece: 5 inches tall
- Notch width: 3/4 inch
- Notch depth: Halfway across the width of the wood
Step 1: Layout the Pieces
The first step is to mark out the dimensions for both the upright and support pieces. Start by marking the support piece at 5 inches and drawing a line across. Then, lay out the notch, which should be an inch and a quarter up from the bottom. The notch will be just over three-quarters of an inch wide to allow for a snug fit when the two pieces slide together.
Step 2: Draw the Notches
Next, you’ll want to draw the notch on both pieces. For the upright piece, mark the notch two inches up from the bottom. This layout is crucial to ensure that when you cut, the pieces fit together perfectly.
Step 3: Make the Cuts
Using a miter box and a hand saw, begin cutting the notches. It’s recommended to cut both notches before cutting the pieces in half to make the process easier. Ensure that you cut down to the bottom of each notch and keep the saw flat to avoid angled cuts.
Step 4: Refining the Notches
After cutting the initial notches, you may need to use a coping saw to finish the cuts. This will help create clean edges for the notches. If you don’t have a coping saw, you can use a hand saw and then file or sand down any rough edges.
Step 5: Sanding
Once the notches are cut, it’s time to sand all the edges and the slot you created. This step is important for ensuring that the stand looks polished and is safe to handle.
Step 6: Finishing Touches
After sanding, you can choose to leave the wood raw for a natural look or apply paint or stain to match your style. The choice is yours! The stand is now ready for use.