Looking for a budget-friendly way to upgrade your kitchen? This modern range hood cover project was created by Angela from Angela Marie Made, and it’s a perfect addition to any kitchen makeover.
With a cost of about $30 for materials, this project is great for both beginners and seasoned DIYers
Materials Needed:
- 1×2 and 2×2 lumber
- Quarter-inch plywood
- Lattice trim
- Wood stain
- Polyurethane
- Lightweight spackle
- Paint (Benjamin Moore Advance line in White Dove)
Tools Required:
- Brad nailer
- Circular saw
- Kreg jig (optional)
- Drill
- Clamps
- Level
Step 1: Install a New Range Hood
If your current range hood is outdated, consider installing a new one. Also, remove any cabinet doors above the range hood to make space for your new cover.
Step 2: Add Side Cabinet Trim (if needed)
If your cabinets have side trim pieces, you can skip this step. For those without side trim, add side trim pieces using a brad nailer and 1x2s to ensure they are the same height as the new range hood.
Step 3: Build the Range Hood Cover Frame
The key to this project is building a sturdy support frame. Start by creating two side pieces with 2x2s and 1x2s nailed together to fit behind the side trim pieces. Use a Kreg jig to create pocket holes for added strength.
Step 4: Add Angle Frame Support
This step involves adding angled support boards. Use 1x2s that are a quarter inch in from the side trim pieces. Stack two 2x2s on top of each other for support and mark the angle needed for the front angled boards.
Step 5: Attach the Plywood Cover
Cut quarter-inch plywood to size for the front cover and secure it with brad nails. For the sides, clamp the plywood up and trace the exact shape needed before cutting.
Step 6: Trim Out the Front
Use lattice trim to finish the front of the range hood cover. This not only enhances the appearance but also hides the plywood edges.
Step 7: Finishing Touches
Caulk any gaps, fill nail holes with lightweight spackle, and then prime and paint the cover. Use a 1×6 board to trim out the front of the frame, cutting 45-degree bevels on each end.
Finally, install the side boards and finish the underside with 1×4 boards painted white. Your DIY range hood cover is now complete, adding character and warmth to your kitchen!
Angela’s DIY range hood cover not only transforms the kitchen’s look but also serves as a practical solution. Let us know in the comments how your project turns out!